3/4 HP Pond Aeration System fit for up to 3 acre, 65ft deep pond.
Quiet and Powerful. 4.7 Cubic Feet Per Minute, 60dB.
Good Quality and Reliable. 2 Year warranty for the pump, 5 year warranty for the diffusers and airlines
Benefits
- Keep the water clear and reduce the chance of fish kills.
- Avoid algae booming and muck accumulation. Reduce the awful odor and swarming pests.
- Two diffusers and two airlines provided, to help aerate a large pond, up to 3 acre.
- Eco-friendly and less maintenance with a quiet oil-less rocking piston compressor.
- Durable self-sink weighted air tubing and non-stick membrane diffuser create a better performance of the aeration.
- Full warranty covered. 2 Years for the compressor and 5 Years for the diffusers and tubing.
Why you need a Aeration system?
Eutrophication happens when there are too many animals/plants/algaes around the pool or the chemical pollution occurs, such as pesticides, herbicides. And that is the reason of algae blooming/fish kills/awful odor/muck accumulation/turbid water body.
To solve that, the key point is increasing the aerobic bacteria by more dissolved oxygen. To help the degradation of the organics. And provide more oxygen to help the fish breath.
A pond aeration system would also “turn the pond over”, make sure the bottom would get aerated (in the natrual way, the oxygen level would goes down very quickly from the water surface to the bottom), such fishs and plants that live near the bottom would get a better environment.
Specification Pump Size 16″ × 14″ × 8″ (40cm × 35cm × 20cm)
Diffuser&Base Size 12″ × 10″ × 3″ (30cm × 25cm × 7.5cm)
Air Tubing 100′ × 5/16″
Power 3/4 HP
Voltage AC 120V
Max Current 4.8 Amps
Air Flow Rate 4.6 CFM(Cubic Feet Per Minute)
Max Pond Size 3 Acre(with 2 diffusers)
Max Air Pressure/Max Depth 2 Bar/65 Feet
Safety Precautions
• Keep the compressor ventilated, cool and dry. The ambient temperature should not exceed 105°F（40°C）. It would hurt the performance and the life time of the unit.
If you use a DIY closed cabinet and housing for this unit. You should open at least two 6”-10” holes on two sides of the pump fans, and install a 6” 20W cooling fan towards to the center of the pump, where the motor stay.
We also provide our housing/cabinet for this ventilation problem, please check:
Model name: ASC01, Website link: https://www.amazon.com/dp/B09ZV37HF3
For longer distance airline system:
It would increase 0.17-0.2 bar (2.5-3 PSI) for each 100′ air line (no matter which air way), that means the max depth would diminsh 5.5-6.5 ft. If you add one more air way, please use the same calculation. The total air flow rate would not change.
Deper Location of the diffuser system would charge more current. The max current is 4.8 Amps.
Manual Book: HQUA PAS20 Manual Book.pdf
